Adjusting The Image Position - Avaya Scopia XT7100 Deployment Manual

Initial Configuration of the XT Series
Field
Use as
2. To adjust the image on your monitor, select Next and continue with
Position on page 86.
If performing the quick setup from the web interface, access the quick setup from the
endpoint to adjust the image. This can be done at any time.
Related Links
Configuring Basic Settings with the Quick Setup Wizard

Adjusting the Image Position

About this task
You can center the endpoint's image correctly on its monitor in this stage of the Quick Setup Wizard.
This is for deployments with a monitor connected to your Avaya Scopia
Procedure
1. Access the Quick Setup Wizard from the endpoint, as described in
Settings with the Quick Setup Wizard
2. Decide if the monitor's image needs adjusting, by verifying if the white border of the triangles
in the top left and bottom right corners are fully visible on all sides.
If the image is centered correctly, skip this procedure and select Next.
®
Avaya Scopia XT Series Deployment Guide
86
Description
®
(Scopia XT Executive only) Select whether this endpoint is used
with different computers:
• Select Personal Executive endpoint for a single user, where you
pair the computer once to the XT Series using Scopia
Control.
• Select Shared Executive endpoint for multiple users, where you
pair the computer afresh with Scopia
connect.
• Select Standard Room endpoint for multiple users, if you do not
want to control the endpoint using a keyboard and mouse via
®
Scopia XT Control. The endpoint is automatically set up with the
default settings of other XT Series models, rather than the
®
Scopia XT Executive. For example, the monitor displays the
system menus when you are not in a call (as opposed to the
computer content, which is the default for Scopia
on page 83
on page 83.
Comments? infodev@avaya.com
®
XT
®
XT Control each time you
®
XT Executive).
Adjusting the Image
®
XT Series.
Configuring Basic
April 2015