Connecting Monitors To The Xt Series - Avaya Scopia XT7100 Deployment Manual

Figure 23: Small business topology using both network ports to connect to a private and public
Related Links
Setting Up the XT Series Hardware

Connecting Monitors to the XT Series

About this task
Connect one or two monitors to the Avaya Scopia
endpoint, and to view the interface (menus) of the endpoint itself. Use the XT Remote Control Unit
to navigate these menus.
Each monitor is connected with an HDMI cable which can transmit both video and audio. You can
calibrate the monitor image position using the quick setup wizard (see
Position on page 86). To configure the advanced monitor settings like the resolution of one or two
monitors and the video layouts of embedded images, see
April 2015
network
on page 42
®
XT Series to use it as a videoconferencing
Configuring Monitors
Figure 24: HDMI cable
Avaya Scopia
Comments? infodev@avaya.com
Connecting Monitors to the XT Series
Adjusting the Image
on page 96.
®
XT Series Deployment Guide
47