Table of Contents
Advertisement
Cylinder Head
Inspect the ignition coils seal for damage and replace
8.
if necessary.
9.
Fit the ignition coils and reconnect the electrical
connectors.
1. Coils
10.
Refit the airbox (see page
1 1.
Refit the fuel tank (see page 10-92).
1 2 .
Reconnect the battery, positive (red) lead first.
1 3 .
Refit the rider's seat <see page
3.8
10-ton.
16-13).
SeNice Manual
Tiger 800 and Tiger 800XC
-
Camshaft Drive Chain Tensioner - all
Models
Removal
1.
Remove the camshaft cover <see page
2.
Remove the right hand cran k cover. Discard the
gasket.
Note the positions of the two different bolt lengths.
Discard the 3 5 m m bolts.
1. Right hand crank cover
3 .
Rotate the crankshaft clockwise (the normal direction
of rotation), using the bolt fitted to the end of the
crankshaft. Stop rotation when number 1 cylinder is
at top dead centre <TDO, that is when the 'dot' mark
on the primary gear aligns with the line on the
crankcase.
1. 'Dot' mark
2. Marker line
3-6).
Advertisement
Chapters
Table of Contents
