Triumph 2012 Tiger 800 Service Manual page 292

Fuel System/Engine
8. Leave the plastic collar and spring on the stepper
motor arm.
cdax
1. Collar
2. Spring
Installation
1. Ensure the Idle speed control lever is correctly
positioned in relation to the throttle cam as shown
below.
10. 1 14
Mana· g ement
SeNice Manual Tiger 800 and Tiger 800XC
-
2. If removed, loosely fit the spring and collar on the
stepper motor arm.
cdax
1. Collar
2. Spring
3 . Locate the stepper motor t o its bracket and tighten
the fixings to
3 . 5 Nm.
1. Idle speed control stepper motor
2. Bracket
3. Fixings
4. Direction of fitting
4. Fit the plastic washer to the lever then fit the metal
washer and nut.
1. Idle speed control lever
2. Nut etc.