Inspection - Triumph 2012 Tiger 800 Service Manual

Front Suspension
4. Using tool T3 880023, remove the locknut and tab
washer. Discard the tab washer.
cdbp
Tool T388002 3
5. Using the same tool, remove the adjuster nut.
6. Remove the bearing cover and dust seal.
Z Remove the bottom yoke from below the frame
headstock.
Always wear eye, hand and face protection when using
a hammer and drift. Use of a hammer and drift can
cause bearings to fragment. Pieces of fragmented
bearing could cause eye and soft tissue injuries if
suitable protective apparel is not worn.
8. Using a suitable drift, evenly and progressively drive
the bearing races from the frame headstock.
9. Remove the inner race and dust seal from the
bottom yoke using a press or puller.
13.18
·
SeiVice Manual Tiger 800 and Tiger 800XC
-

Inspection

!
Only remove raised witness marks from within the
fra me. Removal of material below any raised areas will
reduce the level of interference between the frame and
the bearings. Loss of interference could cause the
bearing to become loose in the frame lead ing to loss of
motorcycle control and an accident.
1. Examine the frame for any raised witness marks
caused by the removal process. Remove any such
marks with fine emery paper or a gentle file.
r • 1 : · r �