Triumph 2012 Tiger 800 Service Manual page 279

Intake Air Temperature Sensor
Removal
Remove the rider's seat <see page 16-13).
1.
Disconnect t h e battery, negative (black> lead first.
2.
Remove t h e fuel ta n k (see p a g e 10-9T>.
3.
Disconnect the intake
4.
multi-plug.
1. Intake air temperature sensor
2. Multi-plug
Remove and discard t h e sensor fixing.
5.
Remove the sensor from the airbox.
6.
Installation
Fit the air tem perature sensor t o the airbox. Secure
1.
with a new screw and tighten to 1.5 Nm.
Reconnect the intake a i r tem perature sensor m ulti-
2.
plug.
Refit the fuel tan k <see page 10-92).
3.
Reconnect the battery, positive (red) lead first.
4.
Refit t h e rider's seat (see p a g e 16-13).
5.
a i r temperature sensor
SeiVice Manual Tiger 800 and Tiger 800XC
-
Fuel System/Engine Management
MAP Sensor
Removal
Remove the rider's seat (see page 16-73).
1.
2. Disconnect t h e battery, negative (black> lead first.
Remove t h e fuel ta n k (see page 70-91>.
3.
Disconnect the MAP sensor m ulti-plug.
4.
1. MAP sensor
2. Multi-plug
3. Fixing
4. Vacuum hose
Disconnect the vacu u m hose from the sensor.
5.
Release the fixing screw secu ring the sensor to the
6.
airbox and remove the sensor.
Installation
Fit the sensor to the airbox, tightening the fixing to
1 .
1.5 Nm.
Refit the vacuu m hose.
2.
Reconnect the MAP sensor m u lti-plug.
3.
Refit the fuel tan k <see page 10-92).
4.
Reconnect t h e battery, positive (red) lead first.
5.
Refit the rider's seat (see page 16-13).
6.
10. 10 1