Front Discs; Wear; Removal - Triumph 2012 Tiger 800 Service Manual

Front Discs

'
•
Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.

Wear

1. Replace any brake disc if worn beyond the service
limit or that exceeds the disc run-out limit.
Front Disc Thickness
Standard:
Serv1ce Limit:
Disc Run-out
Service Limit:
Measure disc run-out using a n accurate dial gauge
mou nted on a surface plate.
1. Disc
2. Dial gauge
4.5 mm
4.0 mm
0.1 5 mm
-
SeiVice Manual Tiger 800 and Tiger 800XC

Removal

I
Do not renew front brake discs individually. Discs must
always be renewed in pairs even if one of a pair is
serviceable.
A dangerous riding condition leading to an accident
could result if this warning is ignored.
1. Remove the front wheel <see page
Support the wheel on blocks as illustrated to avoid
2.
damage to the wheel centre.
1. Wheel
2. Support blocks
3 . Remove a n d discard the bolts.
4. Detach the disc. On ABS models, collect the ABS
pulser ring from the left hand disc.
5. Repeat for the other d isc.
Brakes
15-10>.
14.19