Diagnostic Tool Connection; Triumph Diagnostic Software - Triumph 2012 Tiger 800 Service Manual

Diagnostic Tool Connection

1. To connect the Triumph diagnostic interface to the
motorcycle, remove the pillion seat <see page
and release the diagnostic connector from its
locating tang.
2. Plug the diagnostic interface directly in to the
diagnostic con nector.
1. Diagnostic connector
Diagnostic Interface
3. When the diagnostic
disconnect the Triumph diagnostic interface.
4. Refit the diagnostic connector to its locating tang and
refit the pillion seat ( see page
16-1 3)
session is completed,
16-13).
SeiVice Manual Tiger 800 and Tiger 800XC
-
Fuel System/Engine Management

Triumph Diagnostic Software

Described on the following pages is the range of
information wh ich can be retrieved from the ECM's
memory and the adjustments which can be performed
using the Triumph diagnostic software.
The tables indicate which tests are performed by the
on-board system and what information can be retrieved
by the Triumph diagnostic software.
Note:
•
Full details of how to operate the software
and how to interpret the data can be found
in the Triumph Diagnostic Tool User Guide,
which can be downloaded by authorised
Triumph
www . triumphonline.net.
Build Data
The screen will display the following
Build Data
information :
Motorcycle model;
•
Vehicle Identification Number <VJN>;
•
ECM type;
•
ECM ID;
•
ECM serial number;
•
Tune number;
•
Date of last tune download;
•
Total tune downloads since manufacture;
•
The Jock status of the ECM <ECM Locked,
•
Unlocked or Not Applicable).
dealers from
10.29