Inspection - Triumph 2012 Tiger 800 Service Manual

Transmission
6. Noting the positions of the selector forks, slide the
output selector shaft from the crankcase in the
direction of the clutch. Collect the two selector forks
as they are released by the selector fork shaft.
1. Output selector shaft
2. Sixth gear selector fork
3. Fifth gear selector fork
Z Noting the position of the selector fork, remove the
input selector shaft, leaving the selector fork in the
gearbox.
1. Input selector shaft
2. Selector fork
7.8
SeiVice Manual Tiger 800 and Tiger 800XC
-
8. Remove the gear position sensor.
the selector drum from within the
crankcase.
1. Selector drum removal
10. Collect the input shaft selector fork from the
crankcase.

Inspection

Examine all components for damage and/or wear,
1 .
paying particular attention to the selector forks and
selector drum. Replace any parts that are damaged
and/or worn.
Gear selector fork thickness
Standard
Service limit
Gear selector groove width
Standard
Service limit
5.90 - 6.00 mm
5.80 m m
6.10 - 6 . 1 7 m m
6.27 mm