Assigning Extensions To Moh Groups; Music Source For A Moh Group - Siemens HiPath 1100 Programming Manual

Step by Step

Assigning Extensions to MOH Groups

Extensions can be grouped in two MOH groups.
No extensions configured as a default.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 8 7
or
1 2 Select Group 1 or 2.
Enter the extension numbers (e.g., 11/101).
Press this key.
#
Initial state for Programming Mode.
Deleting Extensions in a Group
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 8 7
or
Select Group 1 or 2.
1 2
To delete all extensions in the group.
*
Press this key.
#
Initial state for Programming Mode.

Music source for a MOH Group

When an extension has a call on hold, the caller will hear
the music programmed for that extension's group.
Enter the code for programming.
0 8 8
or
1 2 Select Group 1 or 2.
...
Enter the code for a music source:
0 4
= No music
0
1 = Internal - MIDI (Default)
= Internal - WAVE
2
= External
3
= External - extension
4
Press this key.
#
Initial state for Programming Mode.
General Programming
95