Limitations To System Expansion; Figure 3-26 Music Module; Chapter 4, "Installation - Siemens hipath 1100 Service Manual

For internal distribution only

2.5 Limitations to System Expansion

Table 2-1 Specific limitations to system expansion
Standard Configuration:
External Analog Lines
Analog Extensions
System Telephone Interface
Expansion Modules
EB 010 (10 extensions)
EB 012 (12 extensions)
EB 202 (2 ext. lines and 2 extensions)
EB 204 (2 ext. lines and 4 extensions)
EB 206 (2 ext. lines and 6 extensions)
EB 210 (2 external lines and 10 exten-
sions)
EB 200 (2 external lines)
EB 400 (4 external lines)
EB 800 (8 external lines)
***
Option Modules:
S
0 Module
TME1 Module
ADSL Module
Fax/DID Module
CD Module
Music Module
TFE Entrance Telephone Interface
Total System Capacity:
External lines/extensions/system
telephones
External analog lines without TME1 or
S modules ****
0
* Each system telephone that is connected occupies one analog telephone slot.
** If the maximum capacity of an analog external line is exceeded due to the installation of an EB or TME1 module, the system
disables a corresponding number of analog external lines, according to each system's capacity. The extension slots, how-
ever, will continue to operate as usual.
***S and TME1 modules cannot be used simultaneously.
0
An ADSL module and a TME1 module cannot be used simultanously on the HiPath 1150/1190.
**** When using digital trunks, you can determine the maximum number of analog lines by subtracting the number of lines as-
signed to each module from the total line capacity for the systems.
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
HiPath 1120 HiPath 1130
*
:
**
2
8
4
0 1
0
0 2
2
0 1
0 1
2 2
0 2
0
1
0
1
1
0
1
17/20/8
6/16/4
12/20/8
6 14
Limitations to System Expansion
HiPath 1150
10
8
4
3
4
0
4
4
4
3
1
1
On Board
4
10/50/8 or 16/40/8
or 17/46/8
16
System Data
HiPath 1190
0
0
8
14
8
20
0
16
8
16
8
4
2
2
1
1
1
32/140/24 or
45/140/24
32
2-5