Placing External Calls On Hold - Siemens HiPath 3000 Operating Instructions Manual

Step by Step
Held on line: 801
If applicable
* 63=Retrieve line?

Placing External Calls on Hold

If you have programmed a key on your telephone as a
hold key
hold.
This enables all other parties to retrieve the call on the
assigned line.
Press the "US:Hold UK:Common Hold" key.
A message appears showing which line is on hold
(e.g. 801); make a note of the line number.
If a trunk key has been assigned, the LED flashes slow-
ly.
t
or Replace the handset or press the key.
Depending on your system configuration, this may be
necessary so other users can also pick up the held call.
Picking up (Retrieving) a Held Call
Precondition: One or more calls have been parked. The
telephone is idle.
Press the key. The LED lights up.
Select and confirm.
or
qjg
Enter the code.
or
If the "Line retrieved" key
ured, press the key.
o
Enter the line number you noted earlier.
or
If a "Trunk key" was assigned to this line
LED flashes slowly. Press the key.
Making Calls – Convenience Functions
Page 63, you can place external calls on
Page 63 has been config-
Page 63:
55