Local Sw Update; Activating A Software Update; Day For Sw Update - Siemens HiPath 1100 Programming Manual

Step by Step
*

Local SW Update

This feature initiates the download of the last software
version released for the PC and then downloads the up-
date for the exchange.
For this feature to work the system must be connected
to a PC with Commserver and APS Version Verifier run-
ning.
Required: Programming Mode must be active (*95
31994).
0 6 0 Enter the code for programming.
Initial state for Programming Mode.

Activating a Software Update

This feature allows you to update the system's software
automatically over an ISDN network on a scheduled
date.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 5 5
or
# Activate/Deactivate software update:
= To activate
*
# = To deactivate (default)
Initial state for Programming Mode.

Day for SW Update

This setting specifies a day for starting the data transfer.
The default setting for the update to start is day 01.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 5 4
Enter the day for starting the transfer.
d d
Initial state for Programming Mode.
General Programming
105