Local Sw Update; Activating A Software Update; Day For Sw Update; Time For Sw Update - Siemens HiPath 1100 Series Programming Manual

General Programming
Step by Step
*
86

Local SW Update

This feature initiates the download of the last software
version released for the PC and then downloads the
update for the exchange.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 6 0
Initial state for Programming Mode.

Activating a Software Update

This feature allows you to update the system's software
automatically over an ISDN network on a scheduled
date.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 5 5
or Activate/Deactivate software update:
#
*
= To activate
= To deactivate (default)
#
Initial state for Programming Mode.

Day for SW Update

This setting specifies a day for starting the data transfer.
The default setting for the update to start is day 01.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 5 4
Enter the day for starting the transfer.
d d
Initial state for Programming Mode.

Time for SW Update

This setting specifies the time of day for starting the
data transfer on the specified day.