Tcp / Ip Settings - 3Com 3CRWEASYA73 / WL-575 User Manual

TCP / IP S
ETTINGS
Configuring the access point with an IP address expands your ability to manage
the access point. A number of access point features depend on IP addressing to
operate.
NOTE: You can use the web browser interface to access IP addressing only if the
access point already has an IP address that is reachable through your network.
By default, the access point will be automatically configured with IP settings from
a Dynamic Host Configuration Protocol (DHCP) server. Use 3Com Wireless
Infrastructure Device Manager to discover or set the initial IP address of the unit.
WIDMAN will allow you to launch a web browser on the Access Point's web
management interface by selecting the Access Point and the configure button.
NOTE: If there is no DHCP server on your network, or DHCP fails, the access point
will automatically start up with a default IP address of 169.254.2.1.
Figure 14 TCP/IP Settings
5-5

TCP / IP Settings