Interface Wireless - 3Com 3CRWEASYA73 / WL-575 User Manual

C 6: C L
HAPTER OMMAND INE
Command
ssid
closed system
max-association
assoc- timeout-interval
auth- timeout-value
shutdown
show interface wireless
show station

interface wireless

This command enters wireless interface configuration mode.
Syntax
Default Setting
Command Mode
Example
To specify the 802.11a interface, enter the following command:
AP (config)#interface wireless a
AP (if-wireless a)#
I
NTERFACE
Function
Configures the service set identifier
Opens access to clients without a pre-configured
SSID
Configures the maximum number of clients that can
be associated with the access point at the same time
Configures the idle time interval (when no frames are
sent) after which a client is disassociated from the
VAP interface
Configures the time interval after which clients must
be re-authenticated
Disables the wireless interface
Shows the status for the wireless interface
Shows the wireless clients associated with the access
point
interface wireless <a | g>
• a - 802.11a radio interface.
• g - 802.11g radio interface.
None
Global Configuration
6-138
Mode Page
IC-W-VAP 6-151
IC-W-VAP 6-152
IC-W-VAP 6-152
IC-W-VAP 6-153
IC-W-VAP 6-153
IC-W-VAP 6-154
Exec 6-154
Exec 6-158