System Management Commands - 3Com 3CRWEASYA73 / WL-575 User Manual

C 6: C L
HAPTER OMMAND INE
Example
In this example, the show history command lists the contents of the command
history buffer:
AP #show history
con
exit
show history
AP #
show line
This command displays the console port's configuration settings.
Command Mode
Example
The console port settings are fixed at the values shown below.
AP #show line
Console Line Information
======================================================
======================================================
AP #

System Management Commands

These commands are used to configure the user name, password, system logs,
browser management options, clock settings, and a variety of other system
information.
Table 11 System Management Commands
Command
Country Setting
country
Device Designation
prompt
system name
snmp-server contact
snmp-server location
Management Access
I
NTERFACE
Exec
databits : 8
parity : none
speed : 9600
stop bits : 1
Function
Sets the access point country code
Customizes the command line prompt
Specifies the host name for the access point
Sets the system contact string
Sets the system location string
6-12
Mode Page
Exec 6--14
GC 6--15
GC 6-16
GC 6-75
GC 6-76