3Com 3CRWEASYA73 / WL-575 User Manual page 278

C 6: C L
HAPTER OMMAND INE
Command Usage
Example
AP(if-wireless g)#antenna id 3CWE598
AP(if-wireless g)#
antenna location
This command selects the antenna mounting location for the radio interface.
Syntax
Default Setting
Command Mode
Command Usage
Example
AP(if-wireless g)#antenna location indoor
AP(if-wireless g)#
I
NTERFACE
• The optional external antennas (if any) that are certified for use with the
access point are listed by typing antenna control id ?. Selecting the
correct antenna ID ensures that the access point's radio transmissions are
within regulatory power limits for the country of operation.
• The antenna ID must be selected in conjunction with the antenna control
method to configure proper use of any of the antenna options.
antenna location <indoor | outdoor>
• indoor - The antenna is mounted indoors.
• outdoor - The antenna is mounted outdoors.
Indoor
Interface Configuration (Wireless)
• When an external antenna is selected, the antenna control must be set to
"right."
• Selecting the correct location ensures that the access point only uses radio
channels that are permitted in the country of operation.
6-146