3Com 3CRWEASYA73 / WL-575 User Manual page 96

C 5: S C
HAPTER YSTEM ONFIGURATION
• Default: Ethernet interface: 19; Wireless interface: 40
Link Port Priority – Defines the priority used for this port in the Spanning Tree
Protocol. If the path cost for all ports on a switch are the same, the port with
the highest priority (i.e., lowest value) will be configured as an active link in the
spanning tree. This makes a port with higher priority less likely to be blocked if
the Spanning Tree Protocol is detecting network loops. Where more than one
port is assigned the highest priority, the port with lowest numeric identifier will
be enabled.
• Default: 128
• Range: 0-240, in steps of 16
Dynamic Entry Age-time – The period of time after which the unit will drop
associated devices from the WDS list. (Default: 300 seconds; Range: 10~10000)
5-48