C
6: C
L
HAPTER
OMMAND
INE
Default Setting
Command Mode
Example
AP (config)#prompt RD2
RD2(config)#
system name
This command specifies or modifies the system name for this device.
Syntax
Default Setting
Command Mode
Example
AP (config)#system name AP
AP (config)#
username
This command configures the user name for management access.
Syntax
Default Setting
I
NTERFACE
AP
Global Configuration
system name <name>
name - The name of this host.
(Maximum length: 32 characters)
Enterprise Outdoor Wireless Bridge/AP
Global Configuration
username <name>
name - The name of the user.
(Length: 3-16 characters, case sensitive)
admin
6-16