Rogue-Ap Duration - 3Com 3CRWEASYA73 / WL-575 User Manual

the access points are allowed or are rogues. If you enable authentication,
you should also configure a RADIUS server for this access point (see
"RADIUS" on page 8).
Example
AP (if-wireless g)#rogue-ap authenticate
AP (if-wireless g)#

rogue-ap duration

This command sets the scan duration for detecting access points.
Syntax
rogue-ap duration <milliseconds>
milliseconds - The duration of the scan. (Range: 100-1000 milliseconds)
Default Setting
350 milliseconds
Command Mode
Interface Configuration (Wireless)
Command Usage
• During a scan, client access may be disrupted and new clients may not be
able to associate to the access point. If clients experience severe
disruption, reduce the scan duration time.
• A long scan duration time will detect more access points in the area, but
causes more disruption to client access.
Example
AP (if-wireless g)#rogue-ap duration 200
AP (if-wireless g)#
Related Commands
rogue-ap interval (6-162)
6-161
Using the Command Line Interface