3Com 3CRWEASYA73 / WL-575 User Manual page 232

C 6: C L
HAPTER OMMAND INE
Command
radius-accounting timeout
radius-accounting
timeout-interim
show radius
radius-accounting enable
This command enables the RADIUS Accounting server. Use the no form to disable
the feature.
Syntax
Default Setting
Command Mode
Command Usage
Example
AP(config)#radius-accounting enable
AP (config)#
radius-accounting address
This command sets the primary and secondary RADIUS Accounting server
hostname or IP address.
Syntax
I
NTERFACE
radius-accounting enable
no radius-accounting
Disabled
Global Configuration
• When the RADIUS Accounting is enabled user data may be collected by
the accounting server/s.
• When RADIUS Accounting is disabled user data will not be collected by the
accounting server/s.
radius-accounting [secondary] address <address>
• secondary - Additional parameter used to specify a secondary RADIUS
Accounting server.
• address - IP address or url of the RADIUS Accounting server.
Function
Sets the interval in between sending RADIUS
Accounting authentication requests
Sets the interval between transmitting accounting
updates to the RADIUS Accounting server
Shows the current RADIUS settings
6-100
Mode Page
GC 6-103
GC 6-104
Exec 6-98