3Com 3CRWEASYA73 / WL-575 User Manual page 258

C 6: C L
HAPTER OMMAND INE
Command
show bridge stp
show bridge link
bridge stp enable
This command enables the Spanning Tree Protocol. Use the no form to disable
the Spanning Tree Protocol.
Syntax
Default Setting
Command Mode
Example
This example globally enables the Spanning Tree Protocol.
AP(config)bridge stp enable
AP(config)
bridge stp forwarding-delay
Use this command to configure the spanning tree bridge forward time globally
for the wireless bridge. Use the no form to restore the default.
Syntax
Default Setting
Command Mode
I
NTERFACE
[no] bridge stp enable
Enabled
Global Configuration
bridge stp forwarding-delay <seconds>
no bridge stp forwarding-delay
seconds - Time in seconds. (Range: 4 - 30 seconds)
The minimum value is the higher of 4 or [(max-age / 2) + 1].
15 seconds
Global Configuration
Function
Displays the global spanning tree settings
Displays current bridge settings for specified interfaces Exec
6-126
Mode Page
Exec 6-130
6-124