3Com 3CRWEASYA73 / WL-575 User Manual page 212

C 6: C L
HAPTER OMMAND INE
Command Usage
Example
AP(config)#no snmp-server trap dot11StationAssociation
AP(config)#
snmp-server engine-id
This command is used for SNMP v3. It is used to uniquely identify the access point
among all access points in the network. Use the no form to delete the engine ID.
Syntax
Default Setting
Command Mode
Command Usage
Example
AP(config)#snmp-server engine-id 1a:2b:3c:4d:00:ff
AP(config)#
I
NTERFACE
This command is used in conjunction with the snmp-server host and
snmp-server enable server commands to enable SNMP notifications.
snmp-server engine-id <engine-id>
no snmp-server engine-id
engine-id - Enter engine-id in hexadecimal (5-32 characters).
Enabled
Global Configuration
• This command is used in conjunction with the
• Entering this command invalidates all engine IDs that have been previously
configured.
• If the engineID is deleted or changed, all SNMP users will be cleared. You
will need to reconfigure all existing users
6-80
command.
snmp-server user