3Com 3CRWEASYA73 / WL-575 User Manual page 51

Menu
SNMP
Rogue AP
AP Management
Administration
WDS/STP Settings
Logging and Time
RSSI
Status
AP Status
Station Status
Rogue AP Status
RSSI Monitor
Event Logs
802.11a Interface
Radio Settings
Security
802.11b/g Interface
Radio Settings
Security
Description
Configures SNMP settings
Performs a scan on each VAP to determine any unauthorized APs
using, or attempting to use the network
Enables Telnet, Web and SNMP on the device
Configures user name and password for management access;
upgrades software from local file, FTP or TFTP server; resets
configuration settings to factory defaults; and resets the access
point
Configures WDS bridging and Spanning Tree Protocol features
Controls logging of Syslog error messages; sets the system clock
via SNTP server or manual configuration
Configures RSSI value display, bridge link distance, and LED display
mode
Displays information about the access point and wireless clients
Displays configuration settings for the basic system and the
wireless interface
Shows the wireless clients currently associated with the access
point
Displays the Rouge AP scan results
Displays RSSI signal strength results
Shows log messages stored in memory
Configures the IEEE 802.11a interface
Configures common radio signal parameters and other settings
for each VAP interface
Enables each virtual access point (VAP) interface, sets the Service
Set Identifier (SSID), and configures wireless security
Configures the IEEE 802.11g interface
Configures common radio signal parameters and other settings
for each VAP interface
Enables each VAP interface, sets the SSID, and configures wireless
security
5-3
Advanced Setup
Page
5-21
5-30
5-31
5-34
5-41
5-49
5-52
5-78
5-78
5-79
5-81
5-82
5-83
5-53
5-55
5-68
5-53
5-60
5-68