C
6: C
L
HAPTER
OMMAND
INE
Example
This example displays all auto-upgrade settings.
AP (config)#show autoupgrade
Firmware Autoupgrade Information
===========================================================
Client Status
Polling Interval
Server 1 IP
Server 2 IP
Server 3 IP
Server 4 IP
Login Username
Login Password
Firmware Directory
===========================================================
AP (config)#
show apmanagement
This command shows the AP management configuration, including the IP
addresses of management stations allowed to access the access point, as well as
the interface protocols which are open to management access.
Command Mode
Example
AP #show apmanagement
Management AP Information
=================================
AP Management IP Mode: Any IP
Telnet UI: Enable
WEB UI
SNMP UI
==================================
AP #
I
NTERFACE
: Enabled
: 24 hours
: 169.254.10.0
: 169.254.20.0
: 0.0.0.0
: 0.0.0.0
: *****
: *****
: d:
Exec
: Enable
: Enable
6-34