C
5: S
C
HAPTER
YSTEM
ONFIGURATION
Figure 39 WDS Scan
Copy to location – Specifies the unit to which you want to copy WDS settings.
• Bridge Parent: Selects the parent node in the wireless bridge network.
• Bridge Child: Selects one of the child nodes in the wireless bridge network.
(Range: 2~6)
Station to Copy – Selects a detected Bridge/AP from which to copy WDS
settings.
• SSID: The name of the basic service set of the detected AP.
• RSSI: Represents a signal to noise ratio that determines the strength of the
signal being transmitted from the detected AP.
• BSSID: The MAC address of the detected AP.
5-44