Radius Client - 3Com 3CRWEASYA73 / WL-575 User Manual

C 6: C L
HAPTER OMMAND INE
Example
AP#show bootfile
Bootfile Information
===================================
Bootfile : ec-img.bin
===================================
AP#

RADIUS Client

Remote Authentication Dial-in User Service (RADIUS) is a logon authentication
protocol that uses software running on a central server to control access for
RADIUS-aware devices to the network. An authentication server contains a
database of credentials, such as users names and passwords, for each wireless
client that requires access to the access point.
Table 18 RADIUS Client
Command
radius-server address
radius-server port
radius-server key
radius-server retransmit
radius-server timeout
radius-server
radius-mac-format
radius-server vlan-format
show radius
radius-server address
This command specifies the primary and secondary RADIUS servers.
Syntax
I
NTERFACE
radius-server [secondary] address <host_ip_address | host_name>
• secondary - Secondary server.
• host_ip_address - IP address of server.
• host_name - Host name of server. (Range: 1-20 characters)
Function
Specifies the RADIUS server
Sets the RADIUS server network port
Sets the RADIUS encryption key
Sets the number of retries
Sets the interval between sending authentication
requests
Sets the format for specifying MAC addresses on the
RADIUS server
Sets the format for specifying VLAN IDs on the
RADIUS server
Shows the current RADIUS settings
6-94
Mode Page
GC 6-94
GC 6-95
GC 6-95
GC 6-96
GC 6-96
GC 6-97
GC 6-97
Exec 6-98