3Com 3CRWEASYA73 / WL-575 User Manual page 221

show snmp
This command displays the SNMP configuration settings.
Command Mode
Exec
Example
AP #show snmp
SNMP Information
==============================================
Service State
Community (ro)
Community (rw)
Location
Contact
EngineId :80:00:07:e5:80:00:00:2e:62:00:00:00:18
EngineBoots:1
Trap Destinations:
1: 192.254.2.9, Community: *****, State: Enabled
2: 0.0.0.0, Community: *****, State: Disabled
3: 0.0.0.0, Community: *****, State: Disabled
4: 0.0.0.0, Community: *****, State: Disabled
dot11InterfaceAGFail
dot11StationAssociation
Enabled
dot11StationReAssociation
Enabled
dot1xAuthFail Enabled
dot1xAuthSuccess
dot1xMacAddrAuthSuccess
Enabled
iappStationRoamedFrom
Enabled
localMacAddrAuthFail
pppLogonFail Enabled
configFileVersionChanged
Enabled
systemDown Enabled
=============================================
AP #
: Enable
: *****
: *****
: WC-19
: Paul
Enabled dot11InterfaceBFail
Enabled dot11StationAuthentication
Enabled
dot1xAuthNotInitiated
Enabled dot1xMacAddrAuthFail
Enabled
Enabled
Enabled localMacAddrAuthSuccess
sntpServerFail
Enabled
6-89
Using the Command Line Interface
dot11StationRequestFail
Enabled
Enabled
iappContextDataSent
iappStationRoamedTo
Enabled
radiusServerChanged
systemUp Enabled
Enabled
Enabled