3Com 3CRWEASYA73 / WL-575 User Manual page 88

C 5: S C
HAPTER YSTEM ONFIGURATION
NOTE: The Login Username and Password must be the same for all devices
designated as servers.
Figure 37 Auto-upgrade
Auto-Upgrade – Schedules automatic updating of firmware (.img) files. Firmware
files must be in the following format; A73_xx_yy_zz_sh.img (shipping version), or
A73_xx_yy_zz_ww.img (world wide version).
Config File Name: Species the configuration file name to look for when
performing a search. (Default: syscfg)
Save Auto-config/Auto-upgrade Settings: Saves both the auto-config and
auto-upgrade settings to system memory. If either the Autoupdate or
Autoupgrade Client have Immediately selected, this will initiate the update or
upgrade process.
Firmware Autoupgrade Client: Enables the Bridge/AP to operate as a client that
sends requests to a specified server for firmware file updates, and schedules the
times at which the requests are sent. (Range: Disable, Immediately, Startup,
Startup+Periodic; Default: Disable)
• Disable: Disables the client service.
• Immediately: Sends an immediate request for a firmware file update.
• Startup: Upon booting up sends a request for a firmware file update.
• Startup+Periodic: Both upon booting up and at a specified interval sends
requests for a firmware file update.
Polling Interval: If using periodic auto-updating, this sets the frequency with
which the access point will search for new a firmware file.
(Default: 24 hours; Range: 1~48 hours)
5-40