3Com 3CRWEASYA73 / WL-575 User Manual page 268

C 6: C L
HAPTER OMMAND INE
Command Usage
Example
The following example disables the Ethernet port.
AP (if-ethernet)#shutdown
AP (if-ethernet)#
show interface ethernet
This command displays the status for the Ethernet interface.
Syntax
Default Setting
Command Mode
Example
AP #show interface ethernet
Ethernet Interface Information
========================================
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Speed-duplex
Admin status
Operational status
========================================
AP #
I
NTERFACE
This command allows you to disable the Ethernet port due to abnormal
behavior (e.g., excessive collisions), and reenable it after the problem has
been resolved. You may also want to disable the Ethernet port for security
reasons.
show interface [ethernet]
Ethernet interface
Exec
: 192.254.2.1
: 255.255.255.0
: 192.254.2.253
: 192.254.2.55
: 10.1.0.55
: 100Base-TX Half Duplex
: Up
: Up
6-136