Connect External Antennas - 3Com 3CRWEASYA73 / WL-575 User Manual

C E
ONNECT XTERNAL
The bridge's primary antenna is it's built-in internal antenna. For some
applications when deploying an WL-575 unit for a bridge link or access point
operation, you may need to mount external antennas and connect them to the
bridge. Typically, a bridge link requires a 5.0 GHz antenna, and access point
operation a 2.4 GHz antenna. WL-575 units acting as managed APs also require
an external antenna for 2.4 GHz operation.
Perform these steps:
1
2
3
A
NTENNAS
Mount the external antenna to the same supporting structure as the bridge,
within 3 m (10 ft) distance, using the bracket supplied in the antenna
package.
Connect the antenna to the bridge's N-type connector using the RF coaxial
cable provided in the antenna package.
Apply weatherproofing tape to the antenna connectors to help prevent water
entering the connectors.
2.4 GHz
5 GHz
N-type Connector
N-type Connector
2.4 GHz
N-type Connector
RF Coaxial Cable
3-6
5 GHz External
High-gain Panel
Antenna
2.4 GHz External
Omnidirectional
Antenna