3Com 3CRWEASYA73 / WL-575 User Manual page 284

C 6: C L
HAPTER OMMAND INE
Command Mode
Command Usage
Example
AP (if-wireless g: VAP[0])#ssid RD-AP#3
AP (if-wireless g)#
closed-system
This command prohibits access to clients without a pre-configured SSID. Use the
no form to disable this feature.
Syntax
Default Setting
Command Mode
Command Usage
Example
AP (if-wireless g: VAP[0])#closed-system
AP (if-wireless g)#
max-association
This command configures the maximum number of clients that can be associated
with the access point at the same time.
Syntax
I
NTERFACE
Interface Configuration (Wireless-VAP)
Clients that want to connect to the wireless network via an access point
must set their SSIDs to the same as that of the access point.
[no] closed-system
Disabled
Interface Configuration (Wireless-VAP)
When closed system is enabled, the access point will not include its SSID in
beacon messages. Nor will it respond to probe requests from clients that do
not include a fixed SSID.
max-association <count>
count - Maximum number of associated stations. (Range: 0-64)
6-152