3Com 3CRWEASYA73 / WL-575 User Manual page 68

C 5: S C
HAPTER YSTEM ONFIGURATION
AP Management Filter – Controls management access to the access point from
wireless clients. Management interfaces include the web, Telnet, or SNMP.
(Default: Disabled)
Clicking 'Edit Port MAC Address Filtering List' displays the following screen which
allows you to enter up to eight MAC addresses for filtering.
Figure 20 Port MAC Address Filtering
Uplink Port MAC Address Filtering Status – Prevents traffic with specified source
MAC addresses from being forwarded to wireless clients through the access
point. You can add a maximum of eight MAC addresses to the filter table.
(Default: Disabled)
Ethernet Type Filter – Controls checks on the Ethernet type of all incoming and
outgoing Ethernet packets against the protocol filtering table. (Default: Disabled)
Prevent Inter and Intra VAP client communication: When enabled, clients
cannot establish wireless communications with any other client, either those
associated to the same VAP interface or any other VAP interface.
Disabled: Allows management access from wireless clients.
Enabled: Blocks management access from wireless clients.
MAC Address: Specifies a MAC address to filter, in the form xx-xx-xx-xx-xx-xx.
Permission: Adds or deletes a MAC address from the filtering table.
5-20