Changing The Country Code; Upgrading Firmware - 3Com 3CRWEASYA73 / WL-575 User Manual

Administration
Figure 32 Administration
Username – The name of the user. The default name is "admin." (Length: 3-16
characters, case sensitive)
New Password – The password for management access. (Length: 3-16 characters,
case sensitive)
Confirm New Password – Enter the password again for verification.
C
HANGING THE COUNTRY CODE
Upon first booting the unit you are prompted to enter the country code, however
should you need to reset the country code the following menu provides the
facility.
Figure 33 Changing the country code
U F
PGRADING IRMWARE
You can upgrade new access point software from a local file on the management
workstation, or from an TFTP server. New software may be provided periodically
from your distributor.
After upgrading new software, you must reboot the access point to implement
the new code. Until a reboot occurs, the access point will continue to run the
software it was using before the upgrade started. Also note that new software
that is incompatible with the current configuration automatically restores the
access point to the factory default settings when first activated after a reboot.
5-35