3Com 3CRWEASYA73 / WL-575 User Manual page 84

C 5: S C
HAPTER YSTEM ONFIGURATION
Figure 34 Firmware Upgrade
Before upgrading new software, verify that the access point is connected to the
network and has been configured with a compatible IP address and subnet mask.
If you need to download from an FTP or TFTP server, take the following additional
steps:
Firmware Upgrade – Configures local and remote firmware upgrade parameters.
Local – Downloads an operation code image file from the web management
station to the access point using HTTP. Use the Browse button to locate the image
file locally on the management station and click Start Upgrade to proceed.
Obtain the IP address of the FTP or TFTP server where the access point software
is stored.
If upgrading from an FTP server, be sure that you have an account configured
on the server with a user name and password.
If VLANs are configured on the access point, determine the VLAN ID with which
the FTP or TFTP server is associated, and then configure the management
station, or the network port to which it is attached, with the same VLAN ID. If
you are managing the access point from a wireless client, the VLAN ID for the
wireless client must be configured on a RADIUS server.
Current version: Version number of runtime code.
Image size: Displays the current firmware file size in bytes.
5-36