3Com 3CRWEASYA73 / WL-575 User Manual page 159

autoconfig IP
This command specifies the servers on which to search for configuration file
updates.
Syntax
autoconfig IP <[ 1 | 2 | 3 | 4] IP_address>
• 1~4 - The server on which to search for updates, up to a maximum of 4.
- IP_address - Specifies the IP address of the auto-configuration server in
the form xx.xx.xx.xx. Using 0.0.0.0 disables communication.
Default Setting
0.0.0.0
Command Mode
Global Configuration
Example
This example specifies the IP addresses for two auto-configuration servers.
AP (config)#autoconfig IP 2 192.168.1.1
AP (config)#autoconfig IP 3 169.254.1.1
AP (config)#
autoconfig username
This command specifies the username used for communication between client
and server.
NOTE: The autoconfig username must be the same for all devices designated as
servers.
Syntax
autoconfig username string
string - The username used to gain access to the server/s specified as
having configuration file updates.
(Length: 1-32 characters, case sensitive)
Default Setting
Disable
6-27
Using the Command Line Interface