3Com 3CRWEASYA73 / WL-575 User Manual page 311

vlan
This command enables VLANs for all traffic. Use the no form to disable VLANs.
Syntax
[no] vlan enable
Default
Disabled
Command Mode
Global Configuration
Command Description
• When VLANs are enabled, the access point tags frames received from
wireless clients with the VLAN ID configured for each client on the RADIUS
server. If the VLAN ID has not been configured for a client on the RADIUS
server, then the frames are tagged with the access point's native VLAN ID.
• Traffic entering the Ethernet port must be tagged with a VLAN ID that
matches the access point's native VLAN ID, or with a VLAN tag that
matches one of the wireless clients currently associated with the access
point.
Example
AP (config)#vlan enable
Reboot system now? <y/n>: y
Related Commands
management-vlanid (6-179)
management-vlanid
This command configures the management VLAN ID for the access point.
Syntax
management-vlanid <vlan-id>
vlan-id - Management VLAN ID. (Range: 1-4094)
Default Setting
1
Command Mode
Global Configuration
6-179
Using the Command Line Interface