Iapp Commands - 3Com 3CRWEASYA73 / WL-575 User Manual

show link-integrity
This command displays the current link integrity configuration.
Command Mode
Exec
Example
AP #show link-integrity
Link Integrity Information
===========================================================
Ethernet Detect : Enabled
Ping Detect : Enabled
Target IP/Name : 192.254.0.140
Ping Fail Retry : 6
Ping Interval : 30
===========================================================
AP #

IAPP Commands

The command described in this section enables the protocol signaling required to
ensure the successful handover of wireless clients roaming between different
802.11f-compliant access points. In other words, the 802.11f protocol can ensure
successful roaming between access points in a multi-vendor environment.
iapp
This command enables the protocol signaling required to hand over wireless
clients roaming between different 802.11f-compliant access points. Use the no
form to disable 802.11f signaling.
Syntax
[no] iapp
Default
Enabled
Command Mode
Global Configuration
Command Usage
The current 802.11 standard does not specify the signaling required
between access points in order to support clients roaming from one access
point to another. In particular, this can create a problem for clients roaming
6-177
Using the Command Line Interface