3Com 3CRWEASYA73 / WL-575 User Manual page 253

bridge-link parent
This command configures the MAC address of the parent bridge node.
Syntax
bridge-link parent <mac-address>
mac-address - The wireless MAC address of the parent bridge unit.
(12 hexadecimal digits in the form "xx-xx-xx-xx-xx-xx").
Default Setting
None
Command Mode
Interface Configuration (Wireless)
Command Usage
Every bridge (except the root bridge) in the wireless bridge network must
specify the MAC address of the parent bridge that is linked to the root
bridge, or the root bridge itself.
Example
AP(if-wireless a)#bridge-link parent 00-08-2d-69-3a-51
AP(if-wireless a)#
bridge-link child
This command configures the MAC addresses of child bridge nodes.
Syntax
bridge-link child <index> <mac-address>
• index - The link index number of the child node. (Range: 1 - 6)
• mac-address - The wireless MAC address of a child bridge unit.
(12 hexadecimal digits in the form "xx-xx-xx-xx-xx-xx").
Default Setting
None
Command Mode
Interface Configuration (Wireless)
Command Usage
• In Root Bridge mode, up to six child bridge links can be specified using link
index numbers 1 to 6.
6-121
Using the Command Line Interface