3Com 3CRWEASYA73 / WL-575 User Manual page 211

- dot11StationRequestFail - A client station has failed association,
re-association, or authentication.
- dot1xAuthFail - A 802.1X client station has failed RADIUS
authentication.
- dot1xAuthNotInitiated - A client station did not initiate 802.1X
authentication.
- dot1xAuthSuccess - A 802.1X client station has been successfully
authenticated by the RADIUS server.
- dot1xMacAddrAuthFail - A client station has failed MAC address
authentication with the RADIUS server.
- dot1xMacAddrAuthSuccess - A client station has successfully
authenticated its MAC address with the RADIUS server.
- iappContextDataSent - A client station's Context Data has been sent
to another access point with which the station has associated.
- iappStationRoamedFrom - A client station has roamed from another
access point (identified by its IP address).
- iappStationRoamedTo - A client station has roamed to another access
point (identified by its IP address).
- localMacAddrAuthFail - A client station has failed authentication with
the local MAC address database on the access point.
- localMacAddrAuthSuccess - A client station has successfully
authenticated its MAC address with the local database on the access
point.
- pppLogonFail - The access point has failed to log onto the PPPoE server
using the configured user name and password.
- sntpServerFail - The access point has failed to set the time from the
configured SNTP server.
- sysConfigFileVersionChanged - The access point's configuration file
has been changed.
- sysRadiusServerChanged - The access point has changed from the
primary RADIUS server to the secondary, or from the secondary to the
primary.
- sysSystemDown - The access point is about to shutdown and reboot.
- sysSystemUp - The access point is up and running.
Default Setting
All traps enabled
Command Mode
Global Configuration
6-79
Using the Command Line Interface