C
6: C
L
HAPTER
OMMAND
INE
Command Mode
Example
AP (if-wireless g: VAP[0])#auth-timeout-value 40
AP (if-wireless g: VAP[0])#
shutdown
This command disables the wireless interface. Use the no form to restart the
interface.
Syntax
Default Setting
Command Mode
Command Usage
Example
AP (if-wireless g: VAP[0])#shutdown
AP (if-wireless g)#
show interface wireless
This command displays the status for the wireless interface.
Syntax
I
NTERFACE
Interface Configuration (Wireless-VAP)
[no] shutdown
Interface enabled
Interface Configuration (Wireless-VAP)
You must first enable VAP interface 0 before you can enable VAP interfaces
1, 2, 3, 4, 5, 6, or 7.
show interface wireless <a | g> vap-id
• a - 802.11a radio interface.
• g - 802.11g radio interface.
• vap-id - The number that identifies the VAP interface. (Options: 0~3)
6-154