3Com 3CRWEASYA73 / WL-575 User Manual page 90

C 5: S C
HAPTER YSTEM ONFIGURATION
router) in your network to ensure that only one route exists between any two
stations on the network, and provide backup links which automatically take over
when a primary link goes down.
Figure 38 WDS and Spanning Tree Settings
WDS Setting – Configures bridge settings for both radio interfaces.
Bridge Role – Each radio interface can be set to operate in one of the following
four modes: (Default: AP)
• AP (Access Point): Operates as an access point for wireless clients, providing
wireless connectivity to a wired LAN. Enabling the AP function disables WDS.
5-42