Rogue-Ap Enable; Rogue Ap Detection Commands - 3Com 3CRWEASYA73 / WL-575 User Manual

Rogue AP Detection Commands

A "rogue AP" is either an access point that is not authorized to participate in the
wireless network, or an access point that does not have the correct security
configuration. Rogue APs can potentially allow unauthorized users access to the
network. Alternatively, client stations may mistakenly associate to a rogue AP and
be prevented from accessing network resources. Rogue APs may also cause radio
interference and degrade the wireless LAN performance.
The access point can be configured to periodically scan all radio channels and find
other access points within range. A database of nearby access points is
maintained where any rogue APs can be identified.
Table 27 Rogue AP Commands
Command
rogue-ap enable
rogue-ap authenticate
rogue-ap duration
rogue-ap interval
rogue-ap scan
show rogue-ap

rogue-ap enable

This command enables the periodic detection of nearby access points. Use the no
form to disable periodic detection.
Syntax
[no] rogue-ap enable
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless)
Command Usage
• While the access point scans a channel for rogue APs, wireless clients will
not be able to connect to the access point. Therefore, avoid frequent
Function
Enables the periodic detection of other nearby access
points
Enables identification of all access points
Sets the duration that all channels are scanned
Sets the time between each scan
Forces an immediate scan of all radio channels
Shows the current database of detected access points Exec
6-159
Using the Command Line Interface
Mode
GC
GC
GC
GC
GC
Page
6-159
6-160
6-161
6-162
6-162
6-163