3Com 3CRWEASYA73 / WL-575 User Manual page 236

C 6: C L
HAPTER OMMAND INE
radius-accounting timeout-interim
This command sets the interval between transmitting accounting updates to the
RADIUS Accounting server.
Syntax
Default Setting
Command Mode
Command Usage
Example
AP(config)#radius-accounting timeout-interim 500
AP (config)#
802.1X Authentication
The access point supports IEEE 802.1X access control for wireless clients. This
control feature prevents unauthorized access to the network by requiring an
802.1X client application to submit user credentials for authentication. Client
authentication is then verified by a RADIUS server using EAP (Extensible
Authentication Protocol) before the access point grants client access to the
network. The 802.1X EAP packets are also used to pass dynamic unicast session
keys and static broadcast keys to wireless clients.
Table 20 802.1X Authentication
Command
802.1x
802.1x broadcast-key-
refresh-rate
802.1x session-key-
refresh-rate
I
NTERFACE
radius-accounting timeout-interim <number_of_seconds>
• number_of_seconds - Number of seconds the access point waits between
transmitting accounting updates. (Range: 60-86400)
3600
Global Configuration
• The access point sends periodic accounting updates after every interim
period until the user logs off and a "stop" message is sent.
Function
Configures 802.1X as disabled, supported, or required IC-W-VAP 6-105
Sets the interval at which the primary broadcast keys
are refreshed for stations using 802.1X dynamic keying
Sets the interval at which unicast session keys are
refreshed for associated stations using dynamic keying
6-104
Mode Page
IC-W-VAP 6-106
IC-W-VAP 6-107