3Com 3CRWEASYA73 / WL-575 User Manual page 312

C 6: C L
HAPTER OMMAND INE
Command Usage
Example
AP (config)#management-vlanid 3
AP (config)#
Related Commands
vlan-id
This command configures the default VLAN ID for the VAP interface.
Syntax
Default Setting
Command Mode
Command Usage
Example
AP(if-wireless g: VAP[0])#vlan-id 3
AP(if-wireless g: VAP[0])#
I
NTERFACE
The management VLAN is for managing the access point. For example, the
access point allows traffic that is tagged with the specified VLAN to manage
the access point via remote management, SSH, SNMP, Telnet, etc.
vlan (6-179)
vlan-id <vlan-id>
vlan-id - Native VLAN ID. (Range: 1-4094)
1
Interface Configuration (Wireless-VAP)
• To implement the default VLAN ID setting for VAP interface, the access
point must enable VLAN support using the vlan command.
• When VLANs are enabled, the access point tags frames received from
wireless clients with the default VLAN ID for the VAP interface. If IEEE
802.1X is being used to authenticate wireless clients, specific VLAN IDs can
be configured on the RADIUS server to be assigned to each client. Using
IEEE 802.1X and a central RADIUS server, up to 64 VLAN IDs can be
mapped to specific wireless clients.
• If the VLAN ID has not been configured for a client on the RADIUS server,
then the frames are tagged with the default VLAN ID of the VAP interface.
6-180