3Com 3CRWEASYA73 / WL-575 User Manual page 129

Rogue AP Status
The Neighbor AP Detection Status window shows the RSSI values of neighboring
APs detected by the unit during it's last scan.
NOTE: Rogue AP Status scans are background activities that will not prevent you
from working with the unit, however throughput may be lowered.
Figure 55 Rogue AP Status
The Neighbor AP Detection Status table displays the following information:
SSID – The service set identifyer for the detected AP.
Encryption – Displays if encryption is being used or not.
RSSI Indicator – Indicates the strength of the signal detected from the
neighboring device in a color representative graph. If a signal with an RSSI value
less than 20 displays the color graph illuminates red. Over 20 illuminates yellow.
RSSI Value (%) – The RSSI figure for the detected device in percentage.
Operation Mode – Indicates what radio mode the detected device is using.
Channel – Indicates the channel number that the detected devise is using.
BSSID – The MAC address that identifies the detected device.
5-81
Security