3Com 3CRWEASYA73 / WL-575 User Manual page 222

C 6: C L
HAPTER OMMAND INE
Flash/File Commands
These commands are used to manage the system code or configuration files.
Table 17 Flash/File Commands
Command
bootfile
copy
delete
dir
show bootfile
bootfile
This command specifies the image used to start up the system.
Syntax
Default Setting
Command Mode
Command Usage
Example
AP #bootfile -img.bin
AP #
I
NTERFACE
Function
Specifies the file or image used to start up the system
Copies a code image or configuration between flash
memory and a FTP/TFTP server
Deletes a file or code image
Displays a list of files in flash memory
Displays the name of the current operation code file
that
booted the system
bootfile <filename>
filename - Name of the image file.
None
Exec
• The file name should not contain slashes (\ or /), the leading letter of the
file name should not be a period (.), and the maximum length for file
names is 32 characters. (Valid characters: A-Z, a-z, 0-9, ".", "-", "_")
• If the file contains an error, it cannot be set as the default file.
6-90
Mode Page
GC 6-90
Exec 6-91
Exec 6-92
Exec 6-93
Exec 6-93