3Com 3CRWEASYA73 / WL-575 User Manual page 156

C 6: C L
HAPTER OMMAND INE
Default Setting
Command Mode
Example
This example restricts management access to the indicated addresses.
AP (config)#apmgmtui SNMP enable
AP (config)#
autoconfig server-status
This command enables the unit to operate as a server that provides updated
configuration files to units operating as clients.
NOTE: When the Bridge/AP is configured as an autoconfig server, the username and
password required to access its configuration data is, username: admin, password:
password.
Syntax
Default Setting
Command Mode
Example
This example enables the unit to be an auto-configuration server.
AP (config)#autoconfig server-status enable
AP (config)#
I
NTERFACE
All enabled
Global Configuration
autoconfig server-status <disable | enable>
• disable - Disables the feature.
• enable - Enables the feature.
Disable
Global Configuration
6-24