C
6: C
L
HAPTER
OMMAND
INE
Default Setting
Command Mode
Example
This example specifies the IP addresses for a server.
AP (config)#autoupgrade IP 2 192.168.1.1
AP (config)#
autoupgrade password
This command specifies the password used to gain access to the server/s for
firmware upgrades.
NOTE: The autoupgrade password must be the same for all devices designated as
servers.
Syntax
Default Setting
Command Mode
Example
This example specifies the password string "keep-it-a-secret".
AP (config)#autoupgrade password keep-it-a-secret
AP (config)#
I
NTERFACE
0.0.0.0
Global Configuration
autoupgrade password string
string - The password used to gain access to the server/s specified as
having firmware updates. (Length: 1-32 characters, case sensitive)
none
Global Configuration
6-32